MidNite Solar MNKID-B

Need help?

Do you have a question about the MidNite Solar MNKID-B and is the answer not in the manual?

Summary

What does my kit come with?

What Will I Need?

Safety Notice for Wiring

Provides a critical safety warning regarding the order of wiring connections.

Installing the Negative Busbar

Big Baby Wiring

Ground Fault Protection (GFP)

Purpose of Ground Fault Protection

Wiring the GFP-63 Breaker

Positive PV Wire Connection

Details connecting the positive PV wire to the GFP-63 breaker and then to the PV breaker.

Mounting the Ground Bus Bar

Battery Breaker Wiring

Connecting Battery Wires to Breaker

Details connecting positive and negative battery wires to the MNEPV30 breaker and bus bar.

Connecting Wires to KID Terminal Block

Circuit Breaker Torque Specification

Important note on tightening circuit breakers to a specific torque value.

Wiring the KID Controller

Connecting Solar and Battery Wires

Guides connecting solar and battery wires to the KID's PV and Battery terminals.

Polarity and Ground Wire Connection

Emphasizes the importance of polarity and connecting the ground wire to the KID.

Startup Procedures and Support

Pre-Power Up Checks

Lists checks before powering up, including breaker status and polarity verification.

Powering Up and Programming

Steps for turning on the system, entering programming, and final breaker activation.

Kid Basic Kit Diagram

Wiring Diagram Overview