Analogue Mechanical Watches
www.mido.ch
257_EN / 03.143/3
Care and maintenance
Temperature
Do not expose your watch to sudden temperature changes (exposure to
sunlight followed by immersion in cold water) or extreme temperatures
(over 60°C (140°F) or below 0°C (32°F).
Magnetic fields
Do not expose your watch to intense magnetic fields such as those
generated by loudspeakers, mobile phones, computers, refrigerators or
other electromagnetic appliances.
Shocks and impacts
Avoid thermal shocks or impacts, since they may harm your watch. In
the event of a violent impact please have your watch checked by an
approved MIDO
®
service centre.
Harmful products
Prevent your watch from coming into any direct contact with solvents,
detergents, perfumes, cosmetic products etc., since they may damage
the bracelet, the case or the gaskets.
Cleaning
We would advise you to clean your watch regularly (except for the
leather strap) using a soft cloth and lukewarm soapy water. After
immersion in salty water, rinse your watch in fresh water and leave it
to dry completely.
Services
Like any precision instrument, a watch must be serviced regularly for
optimum operation. As a general rule, we recommend that you have
your watch checked every 3 to 4 years by your approved MIDO
®
retailer
or service centre. However, please note that depending on the climate
and the conditions of use of the watch, a shorter interval may be
required. To benefit from the highest standards of service and to ensure
your guarantee remains in force, please always contact an approved
MIDO
®
retailer or service centre.
Availability of spare parts
From the stoppage date of the watch production, MIDO
®
guarantees
the availability of its spare parts for a minimum period of 10 years for
standard watches, and for a period of up to 20 years for gold watches.
If for any reason production of a particular spare part is stopped or
deferred, MIDO
®
reserves the right, at its sole discretion, to offer the
customer an alternative solution.
To Previous Page
Loading...
