Need help?Do you have a question about the Miele professional G 7881 and is the answer not in the manual?
General| Brand | Miele professional |
|---|---|
| Model | G 7881 |
| Category | Dental equipment |
| Language | English |
Covers intended use, installation, grounding, and personnel safety guidelines.
Instructions for safely and environmentally disposing of the machine.
Defines high-level disinfection and its effectiveness on microorganisms.
Categorizes instruments into critical, semicritical, and noncritical for proper disinfection.
Details materials suitable for processing and instruments not recommended.
Explains how water quality affects cleaning results and instrument longevity.
Identifies and describes the function of each button and display element.
Details internal parts like the filter system and rear serial interface.
Instructions for setting water hardness and adding rinse aid.
Guidance on careful loading and proper detergent use.
Explains the electric door lock and how to open/close the door.
Procedure for opening the door during a power failure, with safety warnings.
Step-by-step guide to program the integrated water softener.
Instructions on using the correct salt and filling the reservoir.
Explains the meaning of the "Recharging" and "Recharge" indicator lights.
Steps for adding rinse aid and the reservoir capacity.
How to adjust the rinse aid dosage for optimal results.
Explains when to refill rinse aid based on indicator lights.
How to add neutralizer and its automatic dispensing function.
Information on refilling the neutralizer based on indicator lights.
Details on the optional liquid detergent dispenser.
Procedure for replacing the liquid detergent container.
Instructions for using powder detergent and dispensing example.
Guidance on removing soils and preparing instruments for loading.
Checks to perform before starting a program.
Checks after program completion and user responsibility for results.
How to adjust the spring adapter for water connection.
Steps for adjusting the height of the upper basket.
Describes damage to elastomers, plastics, foaming, and corrosion from chemicals.
Details categories of chemicals and their effects on machine parts.
Discusses causes of excessive foaming and control measures.
How soiling can cause foaming or corrosion.
Interactions leading to foaming or gas release.
Steps to power on the machine and initiate a program.
How to add the optional drying function to a program.
Explains how to view program progress and details.
Procedure for modifying a program before it starts.
Procedures for canceling programs, including manual and interrupted scenarios.
What happens at program completion and how to turn off the machine.
Brief explanations of the Wash, Rinse, Drain, and Disinfection programs.
A table detailing the sequence of operations for each program.
Steps to enter programming mode and save configuration changes.
Guide to setting the dispensing concentration for liquid detergent.
Steps to prime the liquid detergent dispensing system.
Guide to setting the dispensing concentration for neutralizer.
Steps to prime the neutralizer dispensing system.
Options for programming buzzer functions like end of program or fault alerts.
How to document cleaning processes via software or printer.
Essential daily checks to ensure proper machine operation and safety.
Step-by-step instructions for cleaning the coarse filter.
Procedure for removing and cleaning the remaining filter components.
Instructions for detaching and cleaning the spray arms for optimal performance.
Procedure for clearing blockages in the drain pump and non-return valve.
Steps to clean filters that ensure sufficient water intake.
Guidelines for cleaning the control panel, exterior surfaces, wash cabinet, and door seal.
Monitoring chemical consumption for dispensing irregularities.
Solutions for when the program won't start or the machine isn't ready.
Addresses issues with the detergent indicator and program cancellation.
Addresses issues with the neutralizer indicator and program cancellation.
Solutions for water softener salt issues and water intake faults.
Solutions for drain faults and when the wash cabinet is not heated.
Addresses detergent left in dispenser, lid issues, and machine noises.
Solutions for instrument corrosion and white residue problems.
Addresses issues causing stains on items and overall poor cleaning results.
Procedure for resetting the thermo switch after overheating.
Provides contact details and advice for service inquiries.
Details installation types and specific steps for undercounter installation.
Guidelines for stable machine placement and preventing steam damage.
Emphasizes the importance of proper grounding and electrical safety regulations.
Details on connecting to cold water supply and acceptable pressure ranges.
Information on connecting to a DI water supply and its pressure requirements.
Requirements for the drain hose, its connection, and drainage flow rate.
Comprehensive list of technical specifications including dimensions, weight, temperature, and noise level.
Guidance on the safe and environmentally friendly disposal of packaging.
Information on recycling the appliance and ensuring safety during storage for disposal.
To Next Page
