Filling lines with water
The appliance is drained completely
before leaving the factory. Before the
first drink is prepared, you will need to
pump water into the lines.
^
Place a cup under the coffee
dispenser.
Hot water
K1 K2 K3 K4 K5 L o n G k C
^
Select Hot water o using < or >.
^
Confirm with OK.
^ Allow some hot water to run into a
cup.
^ Turn off the water by selecting OK
again.
The lines are now filled with water, and
the appliance is ready to use.
Switching off
^
Select On/Off s to turn the coffee
system off.
When a coffee beverage is
prepared, the unit rinses once
before it switches itself off.
First steps to use
12
To Next Page
Loading...
