Maintenance
The perforator should be changed after
15,000 cups of coffee / espresso. The
perforator can be purchased from Miele.
It is recommended to contact the
Miele Service department for
assistance in performing this
maintenance task.
Settings F
K1 K2 K3 K4 K5 L on G k C
^
Select "Settings F" from the main
menu. Confirm with OK.
^ Tap < or > until "Maintenance" is
highlighted. Confirm with OK.
^ Select "Carry out". Confirm with OK.
The appliance is now lowers the
perforator. The display then reads:
i Remove capsule plate and change
the capsule hopper
^
Open the appliance door.
^
Pull the capsule plate out.
Do not reach up into the perforator
opening. Danger of injury!
^
Pull the rubber connector down and
out.
^
Insert the tool (supplied) up into the
unit, a. Turn it to the left, b,to
loosen and remove the perforator
^ Screw the new perforator firmly into
the unit. The spring and ball must be
inserted in the perforator opening so
that the ball is on top.
^
Insert the rubber connector from the
bottom up (with the funnel pointing
downwards).
^
Insert the capsule plate and close the
door.
Cleaning and care
45
To Next Page
Loading...
