Important: the water piping must be rinsed through every
day and the machine cleaned thoroughly before the first
drink of coffee is prepared. Rinsing will take place
automatically if the Automatic rinsing programme option
has been set to "On" and the machine is cold. Hot water
will run out of both spouts into the drip tray once the
machine has heated up.
If the Automatic rinsing programme option has been set to
"Off", select "Maintenance" to rinse the system (see
"Cleaning and care").
Switching on
To switch the machine on:
^ Press the left hand control.
The following message will appear briefly in the display:
Please fill with fresh water
Descale
n Settings F
This is a reminder to fill the water container with fresh water.
The following message will then appear:
Heating-up phase - do not open the door
Descale
n Settings F
If the Automatic rinsing programme option has been set to
"On" (factory default setting), the machine will be rinsed
through after heating up and the main menu will appear:
ESPRESSO
FROTH
COFFEE MAINTENANCE ...
CAPPUCCINO STANDARD n ...
HOT WATER SETTINGS F ...
Making coffee
20
Downloaded from CoffeeMachineManual.com Manuals
To Next Page
Loading...
