EasyManua.ls Logo

Miele CVA 4060 - Switch off after

Miele CVA 4060
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The tick L beside "Off" shows that the machine will not switch
on at a specific time of day.
To switch the machine on at a specific time of day,
^
Turn the right hand control until the upper option
(Set / Change) is highlighted and then press the control.
^
Set the time you want the machine to switch on at by
turning the right hand control and then pressing it.
SETTINGS F Back A
TIMER
12:00 / Change L
Switch on at Off
The tick will now appear beside the word "Change" and the
machine will switch on every day at the time you have set.
(This time will be shown in the display).
If rinsing is set to "On", the machine will automatically
carry out a brief rinse when it switches itself on.
If the machine has switched itself on automatically 3 times
and no drinks or hot water have been dispensed, the
machine will not switch itself on again automatically! The
programmed times will, however, remain in memory and
can be reactivated after manually switching the machine
on again. This prevents the machine switching itself on
unnecessarily, for example whilst you are away on holiday,
and you have not cancelled the automatic switching on
procedure.
Switch off after ...
To prevent the machine using electricity unnecessarily when it
is not being used, it can be set to switch off automatically.
This is done using the "Switch off after" option. A time of
between 15 minutes to 6 hours can be set. This time is
measured from the last time a drink was dispensed.
Settings: Customising your machine
34
Downloaded from CoffeeMachineManual.com Manuals

Table of Contents

Other manuals for Miele CVA 4060

Related product manuals