^
Dip the strip in your drinking water for approximately a
second, then shake off any excess water. The result will be
evident after about a minute.
If the water is harder than 40 °d / 7.0 mmol/l, limescale will
build up more rapidy than with soft water. Descaling will
need to be carried out more regularly than stated to
prevent limescale damage to the machine.
The machine has four programmable levels:
Level
(machine)
Hardness
(local water)
°d mmol/l Water through-flow
in litres
Steam through-flow
in minutes
soft 1 (soft) 0 - 3 0 - 0.6 approx. 100 l
approx. 120 min
medium 1 (soft) 4 - 7 0.7 - 1.3 approx. 80 l
approx. 90 min
hard 2 (medium) 7 - 14 1.3 - 2.5 approx. 60 l
approx. 60 min
very hard 3 (hard)
4 (very hard)
14 - 21
above 21
2.5 - 3.8
above 3.8
approx. 40 l
approx. 30 min
To set the correct water hardness level,
ESPRESSO FROTH
COFFEE MAINTENANCE ...
CAPPUCCINO STANDARD n ...
HOT WATER
SETTINGS F ...
^
Turn the right hand control until "Settings" is highlighted and
then press the control.
SETTINGS F LIGHTING ...
-
TOTAL NO. COFFEES ...
SYSTEM LOCK X ...
WATER HARDNESS ...
H
^
Turn the right hand control until "Water hardness" is
highlighted and then press the control.
A tick L will appear beside the water hardness level which
has been selected.
Settings: Customising your machine
46
Downloaded from CoffeeMachineManual.com Manuals
To Next Page
Loading...
