Making coffee
Preparation
Fill the water
container.
Fill the coffee
bean container
with whole
espresso beans
only.
Select
"In Operation"
RINSING
WARMING UP.
.. followed by:
RINSING/
PREWARMING
... will appear in
the display.
Pipework and
brew unit are
pre-warmed and
flushed through.
SELECT PRODUCT
READY FOR USE
L- -"* -J
Snr
1 cup of coffee
PROG.
* •
ENTER
or
Press the required coffee portion
button once. See "Setting the
portion sizes" in your Instruction
Booklet.
^PP
2 cups of coffee
A
»
ENTEH
2*
or
Press the required coffee portion
button twice. See "Setting the
portion sizes" in your Instruction
booklet.
i
2x
Cappuccino
Pre-heat the cup
with hot
water.
Fill a stainless
steel jug one
third full with
cold,
semi-
skimmed milk.
4%
]
M
i
9
• •
Select steam
and as soon as
steam appears
turn the steam
control dial back
toO.
Position the
steam spout in
the jug just below
the surface of the
milk.
Slowly turn the
dial anti-clock-
wise.
Move the jug in
circles until a
thick froth has
built up. Then
lower the spout
deeper into the
milk to heat it up.
Do not let the
milk
boil!
n
Turn
back
the dial
toO.
, L-*-"
E-t,"
-._&
Yt
*JQ?^
Dispense a
por-
tion of espresso
coffee and add
the milk.
Hot water for tea
«ip
Press the hot water button to
dispense
water.
See "Setting the
portion sizes" in your Instruction
Booklet.