Fitting the tower
^
Before fitting the extension piece re
-
move the protective foil from the pro
-
tective sheets.
^ Hold the tower gently apart and fit it
over the extension piece.
^ Then slide the tower downwards
approx. 2 cm into the vapour canopy.
^
Align the tower.
^
Remove the protective sheets.
^
Now secure the tower on both sides
with 2 screws 3.9 x 7.5 mm.
^
Remove the protective foil from the
canopy.
^ Before using the appliance for the
first time take the grease filter out and
remove the protective foil from the fil
-
ter frame. Then replace the filter.
Installation
25
To Next Page
Loading...
