Installation
33
a
1 exhaust socket for exhaust
ducting 150 mm.
b
1 reducing collar for exhaust
ducting 125mm.
c
Conversion kit for recirculation
mode (the conversion kit is not
supplied and must be ordered
separately; see “Technical data”).
The kit contains an exhaust grille
and aluminum hose with hose clips.
3.5x16mm screws for securing the
rangehood.
The screws supplied are intended for
securing the rangehood to a solid
wooden cabinet floor with a
minimum thickness of 16mm.
Ensure the cabinet floor can
permanently support the weight of
the appliance.
Keep the following in a safe place:
To Next Page
Loading...
