Installation
43
a
1 collar for exhaust ducting
150mm.
b
1 reducing collar for exhaust
ducting 125mm.
c
1 Connector for flat ducting to the
rear or the side (only for EXT
models).
d
Conversion kit for recirculation
mode (the conversion kit is not
supplied and must be ordered
separately; see "Technical data").
The kit contains an exhaust grille
and aluminium hose with hose clips.
3.5x16mm screws for securing the
cooker hood.
The screws supplied are intended for
securing the cooker hood to a solid
wooden cabinet floor with a
minimum thickness of 16mm.
Ensure the cabinet floor can
permanently support the weight of
the appliance.
Keep the following in a safe place:
To Next Page
Loading...
