Cleaning and care
30
After cleaning
Aft
er cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
When r
emoving the panel and filters
for cleaning, also clean off any
residues of oil or fat from the now
accessible parts of the casing to
prevent the risk of these catching fire.
Replace
the grease filters, making
sure that the locking clips are facing
down towards the hob.
If a grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Hook the panel in at the back in the
centr
e and then swing it up at the
front and press it into its retainers.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
coun
ter needs to be re-set.
Whilst the fan is switched on, pr
ess
the operating hours control for
approx. 3 seconds, until only the 1 is
flashing.
The grease filter symbol goes out.
If you want to clean the grease filter(s)
befor
e the operating hours counter has
reached its maximum,
Press the operating hours control
for approx. 6 seconds, until only
the 1 is flashing.
To Next Page
Loading...
