Installation instruction
See the enclosed installation instruction
sheet.
Please read the "Important Safety In
-
structions" and Installation instructions
before installing this hood.
Protective film
The casing is covered by a protective
film to prevent scratches during trans
-
port.
Peel off the film before installing the
casing parts.
Dismantling
If the hood needs to be disassembled,
follow the instructions on the installation
sheet in reverse order.
A lever is enclosed for easier removal
of the chimney extension.
^ After removing the screws from the
chimney, slide the lever between
chimney and chimney extension and
gently apply pressure to ease the
chimney from its hooks.
Installation
32
To Next Page
Loading...
