Installation
^ Please follow the installation steps on
Page 26.
The cooker hood is raised and lowered
by two gas-filled springs.
The position of the upper mounting of
the gas-filled springs depends on the
weight of the cooker hood. The weight
of the cooker hood varies according to
width and type.
The heavier the hood, the further
forward the mounting needs to be
positioned.
The correct position is important for
problem-free up and down movement
of the cooker hood.
^ To do this, before installation position
the gas-filled springs as shown in the
first steps.
^ The cooker hood requires flexible
ducting to allow it to drop down.
Please use the highly flexible ducting
hose supplied.
en - English
8
To Next Page
Loading...
Need help?
General
