EasyManuals Logo

Miele DGC 7440 Installation Manual

Miele DGC 7440
7 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
11232260-01
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
Electrical connection
We recommend that you connect the
steam oven to the electricity supply
using a suitable switched electrical
socket. This simplifies servicing. The
socket must be easily accessible after
the steam oven has been installed.
Risk of damage from incorrect
connection.
Danger of injury! Miele cannot be
held liable for unauthorised
installation, maintenance and repair
work as this can be dangerous to
users.
Miele cannot be held liable for
damage or injury (e.g. electric shock)
caused by the lack of or inadequacy
of an on-site earthing system.
If the plug is removed from the
connection cable or if the cable is
supplied without a plug, the steam
oven must be connected to the
electrical supply by a suitably
qualified and competent electrician.
If the socket is no longer accessible,
or if a hard-wired connection is
planned, an additional means of
disconnection must be provided for
all poles. Suitable means of
disconnection include switches with
an all-pole contact gap of at least
3mm. These include miniature circuit
breakers, fuses and relays. The
connection data is given on the data
plate. Please ensure this information
matches the household mains
electricity supply.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.
Total power output
See data plate.
Connection data
The connection data is given on the
data plate. Please ensure this
information matches the household
mains supply.
Residual current device
For extra safety, it is advisable to
protect the steam oven with a suitable
residual current device (RCD) with a trip
range of 30mA.
Replacing the mains connection
cable
If replacing the mains connection cable,
it must be replaced with a cable type
H05VV-F, available from Miele.
Disconnecting from the mains
Risk of electric shock!
There is a risk of electric shock if the
appliance is connected to the mains
electricity supply during repair or
service work.
After disconnection, ensure the
appliance cannot be switched back
on by mistake.

Other manuals for Miele DGC 7440

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele DGC 7440 and is the answer not in the manual?

Miele DGC 7440 Specifications

General IconGeneral
Oven sizeMedium
Oven typeElectric
Top heatingYes
Number of ovens1
Total oven power- W
Oven thermostat range30 - 225 °C
Pizza making functionNo
Number of shelf positions3
Number of cooking programs20
Total oven(s) interior capacity48 L
Door hingedown
Cord length2 m
Control typeTouch
Door materialGlass
Product colorWhite
Control positionFront
Housing materialStainless steel
Appliance placementBuilt-in
Clock typeElectronic
Timer typeDigital
Connected load3400 W
AC input voltage230 V
AC input frequency50 - 60 Hz
Energy efficiency class-
Energy consumption (conventional)- kWh
Weight and Dimensions IconWeight and Dimensions
Depth569 mm
Width595 mm
Height456 mm
Weight39600 g
Installation compartment depth555 mm
Installation compartment width568 mm
Installation compartment height452 mm
Installation compartment width (min)560 mm
Installation compartment height (min)450 mm

Related product manuals