Problem Possible cause Remedy
The following fault
message appears in
the display:
Before rectifying the problem:
–
Switch the dishwasher off
using the On/Off button K.
; Fault FXX
There may be a
technical fault.
After a few seconds:
–
Switch the dishwasher back
on.
–
Select the programme you
want.
–
Press the Start/Stop button.
If the fault message appears
again, there is a technical
fault.
– Call the Service
Department.
L Waterproof
The Waterproof system
has reacted.
– Close the stopcock.
– Call the Service
Department.
Problem solving guide
45
To Next Page
Loading...
