^ Remove screws a from the
underside of the appliance door.
^ Use the screws to secure both
brackets b to the underside of the
appliance door. The brackets must
be flush with the exterior of the
appliance door.
^ Shorten the brackets if necessary.
^ Screw adjuster strip a to the
furniture door.
^ Loosen the adjusting screws b until
there is a gap of 3.5 mm (see detail).
^ Hang the furniture door onto
adjusting screws b.
^ Secure the furniture door at the top
using screws c.
^
Secure the furniture door at the
bottom using two screws d fitted
through the bracket.
Installing the appliance
37
Downloaded from Fridge-Manual.com Manuals
To Next Page
Loading...
