The lower bracket corrects the side
position of the door:
^
Loosen the screw.
^
Check the side position of the door.
^
Thread the wood screw.
^
Tighten the screw.
^
Put the cover on the brackets.
The number of lower brackets will
depend on the width and the design of
the custom door.
Attaching the covers
^ To mount the cover strips on both
sides of the door, click them into
place from bottom to top, into the
gap between the appliance door and
the custom door.
^
Screw the brackets onto both sides
of the appliance, to hold the cover
strip.
Installing the appliance
65
To Next Page
