Miele G 2630 SCi - Program-Specific Faults

Issue Possible fault Solution
The buzzer sounds. The
program "Energy Saver"
displays the fault:
Water intake temp. too low
The intake water does not
have a minimum
temperature of 115°F
(45°C). See "Plumbing -
Connection to the water
supply".
–
Restart the program.
–
If the fault is displayed
again use a different
program.
The buzzer sounds. The
display shows the
following:
Fault FXX
Drain
Before fixing the fault:
–
Turn the dishwasher off
s.
Fault F11: Fault in the
water drain. There might
be water in the wash
cabinet.
–
Clean the triple filter.
–
Clean the drain pump
and the non-return
valve.
See "User Maintenance
Instructions" for more
information on the above.
– Remove any kinks in
the drain hose.
Frequently asked questions
50