11848190-01
Installation
*INSTALLATION*
The Miele Waterproof System
Provided your dishwasher has been
installed correctly, the Miele Waterproof
System will protect you from water
damage.
Water intake
Danger to health due to wash
water.
Water in the dishwasher must not be
used as drinking water.
Do not drink any water from the
dishwasher.
Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking
water specification of the country in
which the dishwasher is being
operated.
Connect the dishwasher to a drinking
water supply.
The dishwasher may be connected to
cold or hot water (up to max. 65°C)
supplies.
We recommend connecting to a cold
water connection to reduce energy
consumption.
If energy-saving water heating sources,
such as solar energy circulation
systems, are used, we recommend
connecting to the hot water connection.
This saves both time and electrical
energy costs. Hot water is used in all
programs.
The intake hose is approx.5ft (1.5m)
long. A 5ft (1.5m) long, flexible metal
extension hose (tested to
14,000kPa/140bar) is available as an
optional accessory from Miele specialist
retailers or Miele Service.
To Next Page
Need help?
General
