Miele G 646 - Indicator Light and Programme Errors

Problem Possible cause Remedy
The indicator light
"Inlet/Drain" lights up
and flashes alternately.
The stopcock is closed. Open the stopcock fully.
The water inlet filter is
blocked.
Before rectifying the
problem you must:
–
Turn the programme
selector to the "Stop"
position.
–
Switch the dishwasher
off using the "On/Off"
button.
then:
–
Clean the water inlet
filter, see "Solving
problems".
The Waterproof system
has reacted.
Call the Miele Service
Department.
Problem solving guide
44