Miele G 646 - Page 46

Problem Possible cause Remedy
The "End" and "Start"
indicator lights flash
simultaneously at the
end of a programme.
There may be a technical
fault.
–
Turn the programme
selector to the "Stop"
position.
–
Switch the dishwasher
off using the "On/Off"
button.
After a few seconds:
–
Switch the dishwasher
on using the "On/Off"
button.
–
Turn the programme
selector to the required
programme.
– Press the "Start" button.
If the indicator lights flash
again, there is a technical
fault.
– Call the Miele Service
Department.
Problem solving guide
46