What if … Possible fault Fix
shortly after starting a
program, the dishwasher
stops running and
the optic indicator
flashes?
Water intake error.
The "Drain" indicator
flashes.
The water pressure is less
than 4.5 psi (0.3 bar).
Contact a plumber.
Drain error, water remains
in the wash cabinet.
The "Drain" indicator
flashes.
–
Turn off the dishwasher.
–
Clean the triple filter.
See maintenance in
-
structions.
–
Clean the drain pump
and the non-return
valve, see maintenance
instructions.
–
Remove any kinks in
the drain hose.
after starting a program,
the optic indicator does
not shine?
The optic indicator reflec-
tor was not placed in the
steam deflector properly.
Install the optic indicator
reflector correctly.
See Installation manual,
"1. Install the steam
deflector".
Frequently asked questions
39
To Next Page
Loading...
