Miele G 693-4 - Page 47

Problem Possible cause Remedy
The "End", "Start/Stop"
and "3 in 1" indicator
lights flash
simultaneously at the
end of a programme.
There may be a technical
fault.
–
Press the "Start/Stop"
button for at least one
second.
–
Switch the dishwasher
off using the "On/Off"
button.
After a few seconds:
–
Switch the dishwasher
on using the "On/Off"
button.
–
Then use the
programme selector
buttons to select the
programme you wish to
use.
– Press the "Start/Stop"
button
If the indicator lights flash
again, there is a technical
fault.
– Call the Miele Service
Department.
Problem solving guide
47