Switching on
Close the door.
Turn on the tap if it is turned off.
Touch the sensor.
The "Programmes" menu will appear in
the display.
Selecting a programme
Select the required programme in the
display.
The display will change to the "Extras"
menu.
Selecting Extras (if required)
All available Extras are shown in the
display.
Select the Extras you want.
If you want to cancel the selection of
an Extra, touch the sensor for the
Extra again.
Activating the timer (if required)
Touch the Timeroption in the
display.
Select the function you want.
Set the time you want for the timer
and confirm with OK.
Starting a programme
Touch the Startsensor.
Programme end - Switching off
The signal tones may sound at the end
of the programme.
The programme has finished when the
message Finished appears in the
display and the door has opened
slightly (if applicable).
The drying fan may continue to run for
a few minutes at the end of the
programme.
The dishwasher can be switched off
at any time using the sensor.
Confirm the query Switch appliance off?
with Yes.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
worktops when you open the door at
the end of the programme if the fan
is no longer running.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, make
sure that you open the door fully.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.
To Next Page
Loading...
Need help?
General
