This washer-disinfector normally
requires an upper and a lower basket.
Various inserts and special baskets are
also available for a wide variety of
instruments and utensils.
Select baskets and inserts which are
appropriate for the application.
Notes on the individual areas of
application and examples of loading
are given on the following pages.
Before starting a programme you
should carry out a visual check on
the following:
– Is everything correctly
loaded/connected for cleaning?
– Are the lumen or necks of hollow
instruments positioned so that water
can access them unhindered?
– Are the spray arms clean and do
they rotate freely?
–
Are the filters clean? Remove any
coarse soiling and clean them
properly if necessary.
–
Is the adapter connecting the water
supply to the spray arms/jets
correctly connected?
–
Are all chemical containers filled
sufficiently?
At the end of each programme:
–
Carry out a visual check of the load
for cleanliness.
–
Carry out a protein test on a sample
batch of items, e.g. with the Miele
test kit.
–
Check that all hollow shafted
instruments are still securely located
on their jets.
,
Any hollow instruments that have
become disconnected from their
adapters during processing must be
re-processed.
– Check that the lumen of hollow
instruments are free of obstruction.
– Check that jets and connectors are
securely held in position in the
baskets or inserts.
Areas of application
19
To Next Page
Loading...
Need help?
General
