Switching off
^
Press and release the I-0 switch.
As the machine is fitted with an
electric door lock, the door can only
be opened if the I-0 switch is
pressed in (see "Opening and
closing the door").
Cancelling a programme
Once a programme is running it should
only be cancelled in extreme cases,
e.g. when articles in the machine rattle
or jostle against each other and have to
be rearranged.
When testing to EN ISO 15883-1 or
HTM 2030 standards, the
programme must not be interrupted
or cancelled.
,
When dealing with official cases
requiring the containing of
epidemics, the contaminated water
must not be pumped away without
being disinfected first.
^
Turn the programme selector to f.
The programme will be cancelled after
approx. 2 seconds.
^
Open the door a.
,
Caution. Water and items in the
machine may be hot. Danger of
burning or scalding.
^
Arrange the items securely.
(Wear protective gloves where
necessary, and observe appropriate
health and safety regulations relating
to infectious diseases).
^
Replenish powder cleaning agent if
necessary.
^
Close the door.
^
Start the Drain 6 programme.
The water will drain away.
^
Select and start the programme
again.
The following procedure should be
followed when dealing with official
cases requiring the containing of
epidemics using the SPECIAL
93°C-10’ programme:
^ Start the programme again.
The display will show the temperature
holding time required counting
downwards.
Operation
33
To Next Page
Loading...
Need help?
General
