EasyManuals Logo

Miele G 7881 Operating Instructions

Miele G 7881
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Dispensing liquid cleaning agent via DOS 1
Setting the dosage concentration
The dosage concentration must be set exclusively for liquid cleaning agent.
Set it according to the manufacturer's recommendations or the official
standards required.
The dosage concentration must not be altered even if powder cleaning agent
is dispensed via the dispenser in the door.
Step Display / Result
^
Press 0 until E02 appears.
E02
^
Turn the programme selector to E.
without DOS Module connected:
with DOS Module connected:
10 = 10 sec dosage duration
1.00 = 1.0 % dosage concentration
^ Press ß as many times as necessary or
hold pressed in until the required value
appears in the display, e.g. 0.50.
0.50
The dosage duration/concentration
level has now been set.
Dosage concentration set:
Venting the dispensing system
The dispensing system must be vented:
when the dosage concentration is set for the first time,
if the liquid cleaning agent container runs out and is not refilled in time.
Step Display / Result
^
Press 0 until E02 appears.
E02
^
Turn the programme selector to A.
d§1
^
Press ß.
The dispensing system will be
vented automatically. 0 will appear
in the display when the venting
process has finished.
^
Exit from programming mode.
Then start the Pre-rinse D programme.
Any agents which are in the wash
cabinet after the venting process
will be diluted before being drained
away.
Programmable functions
35

Table of Contents

Other manuals for Miele G 7881

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele G 7881 and is the answer not in the manual?

Miele G 7881 Specifications

General IconGeneral
BrandMiele
ModelG 7881
CategoryWasher
LanguageEnglish

Related product manuals