Changing the temperature holding time
Step Display / Result
^
Press button 0 repeatedly or hold pressed in until
the level of the programme block you wish to change
appears in the display.
E10 for Main wash 1
E26 for Final rinse 2
^
Turn the programme selector to the programme you
wish to change, e.g. E.
min _ 1
^
Press ß repeatedly or hold pressed in until the
required value appears in the display, e.g. 10.
min _ 10
Resetting to factory default settings
Step Display / Result
^ Press 0 repeatedly or hold it pressed in until E33
appears in the display.
E33
^ Turn the programme selector to a programme.
factory default setting:
electronics have been programmed to another setting:
00
PP
^
Press ß when PP shows in the display.
00, the factory default
settings have been
reinstated.
The water softener has been reset to the factory default setting. It will need to
be reprogrammed, see "Programming the water softener".
Programme changes which have been made to the freely programmable
Programme A will be kept and will not be reset.
Programmable functions
39
To Next Page
Loading...
Need help?
General
