The following guide may help to find the reason for a fault and to correct it. You
should, however, note the following:
,
Repairs should only be carried out by a Miele authorised and trained ser
-
vice technician in strict accordance with current local and national safety
regulations. Unauthorised or incorrect repairs could cause personal injury or
damage to the machine.
To avoid unnecessary service call-outs, check that the fault has not been caused
by incorrect operation.
To do this:
^
Turn the programme selector to f (the fault code goes out).
^
Switch the machine off with the I-0 switch.
^ Switch the machine on again and reselect the programme.
^ If the problem occurs again and cannot be remedied, please contact the Miele
Customer Contact Centre.
^ Quote the fault code "F...".
Fault Possible cause Remedy
The machine does not
start.
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Switch on at the mains.
The fuse is defective or
has tripped.
Reset the fuse.
(Minimum fuse rating: see
data plate).
The machine is not
switched on.
Press the I-0 switch and
select a programme.
The machine does not
work.
Fault code: F04-F17, F
20-F--
Call the Miele Customer
Contact Centre.
Fault code: F31-33 There is a fault with the
controls for the dispensing
system.
Call the Miele Customer
Contact Centre.
Problem solving guide
49
To Next Page
Loading...
Need help?
General
