Miele G 7919 - Page 83

Options
83
Setting “Start at”
With the Start at function, you set the
exact time at which you want the
programme to start.
 Set the start time and confirm with
OK.
The saved start time for the selected
programme will appear in the display for
several minutes.
When the set time is reached, the
selected programme will start
automatically.
Setting “Finish at”
Use the Finish atfunction to set the
latest time by which the selected
programme has to be finished.
 Set the finish time and confirm with
OK.
The estimated start time for the
selected programme will appear in the
display for several minutes.
When the set time is reached, the
selected programme will start
automatically.
Setting EcoStart
The EcoStart function enables you to
benefit from time variable economy
electricity rates. Before you can use this
option, you need to set up to three
electricity rate tariff times (see “Settings
- EcoStart”).
Then set the time by which the selected
programme should be finished.
The dishwasher will then start
automatically in the most economical
electricity rate zone within the time set.
 Set the latest end time you want and
confirm with OK.
The messageWaiting for EcoStart will
appear in the display.
The programme will start automatically
when the estimated start time is
reached.