The time starts counting down until the
programme start time: in 1 hour steps
for delay start periods of over 10 hours,
and in minutes for delay start periods of
under 10 hours.
When the set time is reached, the
programme selected will begin
automatically. The time left for a
programme to run then shows in the
display, the indicator light , goes out
and the ndicator light for the selected
programme comes on.
How the Delay start time is shown in
the display:
up to 59 minutes:
e.g. 30 minutes = 30
1 hour up to 9 hours 30 minutes
e.g. 5 hours = 5.00
more than 10 hours:
e.g. 15 hours = 15^
Starting a programme before the
Delay start period has elapsed:
Proceed as follows:
^
Open the door.
^
Press the V button.
^
Press the U button.
^
Select the programme required with
the programme selector button.
^
Close the door.
The In-operation indicator lights up. The
programme will begin.
Additional functions
41
To Next Page
Loading...
