^
Screw the new lamp into the
connection. Make sure that it fits
securely back in its safety ring a.
^
Replace the lamp cover, and click it
into place at the sides.
. . . the floor of the refrigerator is wet.
The condensate drain hole is blocked.
^ Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature, it is advisable not to
open the door while waiting for the
appliance to be serviced.
Problem solving guide
30
To Next Page
Loading...
Need help?
General
