Do you have a question about the Miele KF 2982 SF and is the answer not in the manual?
Appliance placement | Freestanding |
---|---|
Product colour | Stainless steel |
Built-in ready | No |
Door hinge | Right |
Reversible doors | Yes |
Housing material | Stainless steel |
Number of compressors | 1 |
Number of doors | 2 |
Control type | Electronic |
Built-in display | Yes |
Lamp type | LED |
Climate class | SN-T |
Noise level | 38 dB |
Fridge interior light | Yes |
Number of shelves/baskets in fridge | 4 |
Number of vegetable drawers | 2 |
Door balconies | 4 |
Egg balcony | Yes |
Bottle rack | Yes |
Ice cube tray | Yes |
Fresh zone compartment | Yes |
Height | 185 cm |
Energy Efficiency Class | A++ |
Number of Shelves | 4 |
Number of Door Bins | 4 |
Defrost System | Automatic |
Cooling System | No Frost |
Width | 91 cm |
Depth | 76 cm |
Total Capacity | 554 L |
Refrigerator Capacity | 215 L |
Defines the intended domestic and commercial use of the appliance and lists prohibited uses.
Provides warnings and guidelines to prevent child injury or entrapment related to the appliance.
Covers coolant safety, electrical connection, grounding, and risks associated with power.
Details proper usage, food storage risks, cleaning, and transport safety guidelines.
Outlines safe procedures for disposing of the appliance, including child safety and environmental concerns.
Provides guidance on environmentally friendly disposal of packaging and old appliances.
Covers installation location, climate class, ventilation, and niche floor load-bearing capacity.
Details side-by-side options, installation dimensions, niche preparation, and appliance securing methods.
Covers door alignment, water connection, electrical connection, and final appliance setup.
Provides advice on optimizing energy consumption through installation, maintenance, and temperature settings.
Identifies appliance components and explains the main screen display and its elements.
Explains how to access and use the settings mode for various appliance functions.
Guides through unpacking, initial cleaning, and the first-time startup and configuration process.
Details how to switch the appliance on, off, and off for extended periods.
Covers keypad lock, eco mode, self-test, and condensation protection settings.
Explains how to use, adjust intensity, and manage door assistant features like Push2Open/Pull2Open.
Details setting up and managing the appliance's WiFi connection and Miele@home service.
Covers demo mode, factory default reset, vacation, and Sabbath modes.
Explains how to manage water filter and active air clean filter display indicators.
Covers temperature settings for fridge, MasterFresh, and freezer zones, including DynaCool.
Explains the operation and benefits of Automatic SuperCool and SuperFrost functions.
Details the temperature and door alarms, their triggers, and how to manage them.
Provides instructions for removing and adjusting door shelves, main shelves, drawers, and baskets.
Explains how to remove the freezer basket dividing panel and the ice cube tray for cleaning.
Covers storage zones, unsuitable foods, buying tips, and correct storage practices.
Details storage conditions, humidity control, and best practices for the MasterFresh compartment.
Covers freezing capacity, process, packaging, storage times, defrosting, and cooling drinks.
Explains how to turn the ice maker on and off, production capacity, and potential issues.
Describes the automatic defrosting system for the refrigerator and freezer zones.
Lists recommended cleaning agents, precautions, and procedures for the appliance exterior and interior.
Provides instructions for cleaning the water filter and replacing air clean filters.
Details the water filter's function, replacement schedule, and step-by-step changing procedure.
Addresses issues like appliance not working, no interior light, and general fault messages.
Covers frequent compressor cycling, temperature drops, and alarm sound causes.
Troubleshoots problems with doors not opening, condensation, and door pillar warmth.
Explains messages related to temperature, door status, Sabbath mode, and fault notifications.
Addresses issues with ice production quantity, quality, and odor.
Covers problems related to water leaks, connection pressure, and water intake.
Troubleshoots interior lighting faults and common appliance noises.
Provides contact details for service, fault reporting, and warranty registration information.