Do you have a question about the Miele KFN 28132 D ws and is the answer not in the manual?
Door hinge | Right |
---|---|
Control type | Buttons |
Display type | LED |
Product color | White |
Housing material | Stainless steel |
Reversible doors | Yes |
Shelves material | Tempered glass |
Door opening angle | - ° |
Appliance placement | Freestanding |
Number of compressors | 1 |
Fridge net capacity | 209 L |
Fridge door balconies | 3 |
Fridge gross capacity | - L |
Multi-Airflow system (fridge) | No |
Fridge number of shelves/baskets | 4 |
Noise level | 40 dB |
Certification | CE |
Climate class | SN-T |
Total net capacity | 310 L |
Star rating | 4* |
Freezer position | Bottom-placed |
Freezing capacity | 9 kg/24h |
Freezer net capacity | 101 L |
Storage time during power failure | 26 h |
Current | 10 A |
Connected load | - W |
AC input voltage | 220 - 240 V |
AC input frequency | 50 Hz |
Energy efficiency scale | A to G |
Annual energy consumption | 246 kWh |
Depth | 655 mm |
---|---|
Width | 600 mm |
Height | 1861 mm |
Weight | 65000 g |
Describes the intended use of the appliance, its limitations, and proper operating practices to ensure safety and prevent damage.
Details essential safety measures to protect children from potential hazards associated with the appliance.
Covers technical safety aspects, including coolant handling, electrical safety, and potential risks during operation.
Outlines correct use guidelines to prevent damage, fire, explosion, and ensure safe operation.
Instructions for using the Super Freeze function for rapid freezing.
Instructions for using the DynaCool function for even temperature distribution.
Information on recommended storage durations for various food groups in the freezer.
Troubleshooting steps for common problems like lack of cooling or non-functional interior lighting.
Diagnosing and resolving issues related to compressor operation and temperature variations.
Solutions for issues concerning the door seal and ice formation inside the appliance.
Interpreting display messages and resolving other operational faults.
Details on power supply, socket requirements, and essential electrical safety precautions.
Guidance on selecting an appropriate installation location and considerations for side-by-side placement.
Specifies the acceptable ambient temperature range for optimal appliance operation.
Instructions on ensuring adequate ventilation and correctly fitting wall spacers.
Steps for physically installing the appliance, including alignment and levelling.
Specific instructions for integrating the appliance into kitchen cabinetry.
Detailed step-by-step instructions for safely swapping the appliance's door hinges.