To Next PageTo Next Page
Need help?Do you have a question about the Miele KFN 9855 iDE and is the answer not in the manual?
General| Type | Fridge-freezer |
|---|---|
| Appliance placement | Freestanding |
| Energy Efficiency Class | A++ |
| Width | 60 cm |
| Depth | 65 cm |
| Cooling System | No Frost |
| Temperature Zones | 2 |
| Control Type | Electronic |
| Door hinge | Right |
| Refrigerant | R600a |
| Noise level | 38 dB |
| Number of Doors | 2 |
| Defrost System | Automatic |
| Color | Stainless Steel |
Details buttons and indicators for refrigerator and freezer sections.
Identifies key components like lighting, drawers, ice maker, and connections.
Lists and describes accessories included with the appliance.
Lists and describes optional accessories available for the appliance.
Covers general safety, intended use, and initial user warnings.
Details safety measures for children and packaging suffocation risks.
Outlines restrictions for storing materials, hazardous areas, and user capabilities.
Covers coolant safety, appliance positioning, and electrical safety requirements.
Addresses electrical hazards, moisture risks, damaged units, and authorized repairs.
Discusses using original parts, water connection, climate range, ventilation, and storing flammable items.
Warns about operational hazards like sparking, explosions, and food safety concerns.
Details precautions for cleaning, avoiding steam, sharp objects, and chemical use.
Provides instructions for safely disposing of the old appliance and its components.
Guides on installation and maintenance practices to optimize energy efficiency.
Explains how temperature settings impact energy consumption.
Provides usage tips like minimizing door openings and proper food storage for energy saving.
Instructions for initial appliance setup and standing time before plugging in.
Explains how to operate the appliance using the sensor buttons.
Details how to turn the refrigerator and freezer sections on separately.
Instructions on how to turn off the refrigerator and freezer sections.
Guides on how to properly switch off the appliance for extended absences.
Explains why correct temperature is crucial for food safety and spoilage prevention.
Describes the DynaCool function for even temperature distribution.
Specifies the ideal temperature for freezing and storing food in the freezer.
Recommends the optimal temperature for the refrigerator section.
Explains the appliance's temperature display, including normal operation and error indications.
Details how to adjust the temperature settings for both refrigerator and freezer sections.
Describes the process of adjusting temperatures and the time required for stabilization.
Outlines the selectable temperature ranges for the refrigerator and freezer.
Explains how to activate the Super Cool function for rapid chilling.
Details how to manually switch off Super Cool or when it automatically turns off.
Explains when and how to use Super Freeze for optimal food preservation.
Details the procedure for turning on the Super Freeze function.
Describes how to turn off Super Freeze manually or when it automatically stops.
Explains the alarm system for temperature and open doors.
Describes when the temperature alarm triggers and its signals.
Instructions on how to silence the audible alarm signal.
Details the door alarm that sounds if doors are left open too long.
Explains how to turn off the audible door alarm.
Lists various additional settings and their corresponding functions.
Explains the Sabbath mode, its features, and how it affects appliance operation.
Provides step-by-step instructions to activate and deactivate Sabbath mode.
Explains the purpose and operation of the safety lock feature.
Guides on how to activate and deactivate the safety lock.
Details how to confirm the safety lock setting after activation.
Explains how to switch between Celsius and Fahrenheit temperature displays.
Step-by-step guide to selecting the desired temperature unit.
Guides on how to change the brightness level of the appliance display.
Details the process for adjusting display brightness from level 0 to 5.
Explains the heating control for condensation management at the lower hinge.
Instructions on how to adjust the hinge heating control for condensation.
Explains different temperature zones within the refrigerator for optimal storage.
Identifies the warmest areas and suggests suitable food for storage.
Identifies the coldest areas and lists perishable foods for storage.
Lists items not to store and rules for efficient refrigerator usage and component protection.
Lists foods that should not be stored at temperatures below 5°C due to sensitivity.
Emphasizes the importance of initial freshness and proper shopping practices.
Provides guidelines for covering food to prevent odour, drying, and contamination.
Details how to store fruits and vegetables in the drawers.
Notes that high-protein foods like shellfish and fish deteriorate faster.
Instructions on how to adjust the height and position of refrigerator shelves.
Explains how to remove and replace the shelf above the drawers for cleaning.
Guides on removing and inserting the fruit and vegetable drawers.
Instructions for adjusting or removing door shelves and bottle holders.
Details how to move or remove the bottle divider for secure storage.
Explains the importance of not exceeding the maximum freezing capacity.
Provides guidance on freezing fresh food quickly to maintain quality.
Tips for checking packaging, expiry dates, and shop temperatures for frozen food.
Lists suitable and unsuitable foods for home freezing and preparation methods.
Details suitable packing materials, expelling air, and labeling for freezing.
Explains using Super Freeze 24 hours prior to freezing large quantities.
Advice on preventing contact between new and existing frozen food.
Methods for safely thawing frozen foods using microwave, oven, or room temperature.
Warning about cooling drinks in the freezer and the risk of bursting.
Instructions on how to activate the automatic ice cube maker.
Advises not to consume the first three batches of ice produced.
Explains how to increase ice production rate using Super Freeze.
Details how to turn off the ice cube maker independently.
Guides on adjusting water quantity to change ice cube size.
Instructions on changing water quantity and checking ice cube size.
Explains the use of freezer drawers for freezing and storage.
Guides on how to adjust the separators within the lower freezer drawer.
Provides steps for removing freezer drawer containers for cleaning.
Explains that the refrigerator section defrosts automatically.
Describes the NoFrost system for automatic freezer defrosting.
Lists cleaning agents to avoid and recommends using mild dishwashing liquid.
Recommends using Miele stainless steel conditioner for protection and shine.
Steps to take before cleaning, including turning off power and removing food.
Instructions for cleaning the appliance interior and removable accessories.
Details how to clean the ice cube tray in place.
Guides on activating the vacation state for the ice cube maker for cleaning.
Instructions for cleaning the door seal and avoiding oils or grease.
Explains the importance of cleaning ventilation slits for energy efficiency.
Provides instructions for cleaning the air filter, including removal and replacement.
Steps to reset the air filter indicator after cleaning.
Guides on reassembling the appliance and restarting it after cleaning.
Troubleshoots issues with the appliance not cooling or the display being dark.
Addresses frequent compressor operation and excessively low temperatures.
Troubleshoots issues related to blocked ventilation and frequent door openings.
Addresses problems caused by ice buildup in the freezer and improper installation.
Troubleshoots infrequent compressor operation and rising appliance temperatures.
Explains why the freezer display might show dashes and how to check.
Details the electrical power failure indicator and temperature fluctuations during outages.
Guides on how to respond when the display shows error codes F1 to F5.
Troubleshoots issues with the interior lighting and provides safety warnings.
Addresses food freezing together and issues with turning the appliance off.
Troubleshoots problems with switching on the ice cube maker or producing ice.
Explains causes for unpleasant odour/flavour in ice cubes and solutions.
Describes common operational noises like humming, gurgling, and cracking.
Provides solutions for common noises like rattling and clinking.
Provides contact information for Miele dealer and factory customer service.
Details the warranty period and where to find warranty terms.
Outlines requirements for tests, including standards and manufacturer information.
Emphasizes reading instructions before installation or use to prevent accidents.
Details how to recycle packaging materials and their environmental benefits.
Provides guidance on responsible disposal of old appliances to protect health and environment.
Ensures safe operation through correct installation and warns about appliance weight.
Specifies ideal location conditions, ventilation, and electrical outlet accessibility.
Advises on preventing condensation in humid environments and ensuring proper sealing.
Details climate classes and their compatibility with room temperatures.
Specifies cabinet alignment, corner angles, and even sidewalls for the niche.
States requirements for the niche floor to be even, horizontal, and strong.
Emphasizes securing adjoining furniture/units for appliance stability.
Provides information on fixed hinges and contacting service for changes.
Explains the importance of ventilation slits and avoiding blockages for compressor health.
Provides specific dimensions for the appliance and required cabinet opening.
Ensures sufficient space for the door to open fully.
Specifies niche dimensions for inset and frameless installation styles.
Illustrates required clearances for the appliance door swing based on panel thickness.
Shows the locations for water line entry above the bracket and at the bottom right.
Warns against installing the shut-off valve behind the appliance.
Describes the inset style where panels fit fully within the opening.
Provides panel thickness, connecting rails, and door panel weight limits.
Explains the frameless style where panels overlay adjacent cabinetry.
Details panel thickness and door panel weight limits for frameless installation.
Includes warnings about weight, removing accessories, and checking parts movement.
Guides on securing the appliance safely using anti-tipping brackets.
Illustrates different methods (A, B, C, D) for installing brackets based on wall/floor type.
Explains fitting brackets in cabinets deeper than 25 inches, requiring a spacer.
Instructions for cutting and fastening adhesive covers to mounting plates.
Guides on carefully pushing the appliance into the niche and connecting utilities.
Details using wrenches and drivers to level the appliance feet.
Instructions for securing the appliance to the cabinet wall using screws.
Guides on realigning the appliance door using headless screws and an Allen key.
Details how to adjust the front panels of the freezer drawers.
Instructions for inserting the air filter and installing the base cover.
Guides on inserting retainers and locking pins for the base cover.
Details installing the base cover with ventilation slits using fastening bolts.
Instructions for loosening screws to adjust the base cover height.
Guides on removing mounting rails from freezer drawers and refrigerator door.
Details installing mounting rails on furniture fronts and covers for drawers and doors.
Guides on attaching the furniture front to the appliance door using adjustment bolts.
Instructions on how to vertically align the furniture front with adjacent doors.
Guides on horizontally sliding the furniture door for alignment.
Details tightening adjustment bolts to ensure mounting rails sit tight.
Instructions for loosening screws to adjust the depth of the furniture front.
Guides on attaching the upper cover piece and seals between door and front.
Details attaching furniture covers to freezer drawers and aligning them.
Outlines requirements for plumbing work, water quality, and shut-off valve installation.
Specifies requirements for connecting to a cold water line, including pressure and hygiene.
Guides on pushing the appliance, laying the water line, and electrical disconnection.
Details screwing the OD adapter, opening shut-off valve, and checking for leaks.
Notes that the water inlet pipe must be primed by a technician before first use.
Specifies power requirements: 110-120 VAC, 15 amp circuit, and avoiding extension cords.
Details safety for the power cord, including grounding, plug modification, and adapters.
Ensures outlet accessibility and the need for disconnect devices.
Warns against connecting other devices, inverters, or energy-saving plugs.
Advises against grounding to gas pipes and checking appliance grounding.
Reiterates grounding requirement, plug type, and avoiding two-prong adapters.
