NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010107
Front Panel Information
Fully Integrated Model
Width: 17 3/4" in all cases
Thickness: Minimum 3/4" outside frame
Height: Determined using the following calculation:
Panel Height = HOC - TKH
HOC = Total height of cabinet or side panel
TKH = Toe-kick height
Note: Panel may extend above unit.
This is not considered in height calculation
Maximum panel weight: 50 Pounds
Miele
Fully Integrated
Freezer
TKH
HOC
Panel Height
Custom Panel Installations
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the front panel may be extended accordingly.
Simply maintain the toekick height and extend the panel the needed distance.
Adjoining cabinet
Machine
Extended Panel
To Next Page
Loading...
Need help?
General