Safety switch-off
Safety switch-off with an overlong cooking time
If one of the cooking zones is heated for an unusually long
period of time (see chart), and the power settings are not
altered, the cooktop will switch itself off automatically and the
appropriate residual heat indicator will appear.
To use the cooking zone again, switch it back on in the usual
way.
Power setting* Maximum operating time in hours
110
25
35
44
53
62
72
82
91
Safety switch-off if the sensors are covered
Your cooktop will switch off automatically if one or several of
the sensors remain covered for longer than 10 seconds, for
example, by finger contact, food boiling over or by an object
such as an oven glove or tea towel.
"ER03" will flash in the cooking zone displays and a tone will
sound for 10 seconds.
^
Clean the control area or remove the obstruction.
"ER03" will go out and you can operate the appliance again.
Safety features
39
To Next Page
Loading...
Need help?
General
