Need help?Do you have a question about the Miele PDR 507 HP and is the answer not in the manual?
General| Capacity | 7 kg |
|---|---|
| Energy Efficiency Class | A+++ |
| Control Type | Electronic |
| Type of heating | Heat pump |
| Dimensions (H x W x D) | 85 x 60 x 62 cm |
| Drying Programs | Cottons, Minimum iron, Woollens handcare |
| Drum volume | 130 l |
| Electrical connection | 220-240 V |
| Programs | Delicates, Wool |
| Colour | White |
| Appliance type | Heat-pump dryer |
Guidelines for environmentally responsible disposal of packaging materials.
Instructions for the proper disposal of old appliances.
Defines the intended and prohibited uses of the tumble dryer.
Covers safety aspects related to installation, modifications, and electrical connections.
Provides information on the heat pump and refrigerant gas used by the appliance.
Highlights correct usage, fire hazards, load limits, and general safety.
Details filter safety, frost risks, temperature limits, and drain hose security.
Lists textiles and materials that must not be dried due to fire risk.
Warns about fire risks from specific materials and operational errors.
Advises on safe use of fabric softeners and precautions with chemicals.
Provides instructions and warnings for using the optional fragrance flacon.
Information on using genuine Miele accessories and spare parts.
Details the function of each button, sensor, and display element.
Explains the various symbols associated with the dryer's programmes.
Describes the meaning of symbols shown in the appliance's display.
Explains how to use sensors and navigate the main menu.
Illustrates how to use selection lists, set values, and exit menus.
Guides on switching on the appliance and setting the initial display language.
Covers external appliance references, time queries, and display brightness.
Instructions for selecting programme packages and setting up payment systems.
Details the final steps to complete the appliance's initial setup.
Provides essential advice for preparing and drying laundry items.
Explains the meaning of common care label symbols for laundry.
Guides on how to load laundry and correctly close the dryer door.
Instructions on using the socket for the fragrance flacon.
Covers turning on the dryer and selecting programmes via the selector.
Explains the main programme menu and how to select drying levels.
Guides on selecting the duration for timed drying programmes.
Details the use of 'Gentle tumble' and 'Anti-crease' programme extras.
Covers setting and managing the delay start function.
Information on how the payment system affects programme start.
Explains how to start a programme and estimated time remaining.
Details how the programme ends and how to remove laundry.
Highlights the need for regular maintenance after use.
Lists and describes the standard drying programmes available.
Explains consequences of programme changes with payment systems.
Guides on how to modify or cancel a running programme.
Instructions for adding or removing laundry during a programme.
Details how to resume operation after a power outage.
Step-by-step guide for inserting the fragrance flacon into the filter.
Instructions for adjusting fragrance intensity and closing the flacon.
Guidance on how to remove, store, and replace the fragrance flacon.
Highlights the importance of regular cleaning for filter systems.
Details on when and how to clean the fluff filters.
Instructions for cleaning the filter located in the plinth.
Guides on cleaning the grille for heat exchanger efficiency.
Explains how to remove fluff from filters and the drum area.
Detailed procedure for cleaning fluff filters and air flow openings.
Instructions for rinsing and cleaning fluff filters using water.
Step-by-step guide for removing the plinth filter for cleaning.
Covers cleaning the plinth filter with water and when to replace it.
Details on cleaning the filter insert within the plinth.
Guidance on checking and cleaning the heat exchanger cooling fins.
Instructions for correctly refitting the filter insert and fluff filter.
Procedure for cleaning and properly closing the fluff filter flap.
Steps for removing and cleaning the bottom right grille.
Details on cleaning and refitting the cooling fins grille.
Instructions for cleaning the appliance exterior and interior drum.
Troubleshooting common display messages and faults.
Addresses common issues leading to insufficient or uneven drying.
Identifies causes for prolonged drying times or premature switching off.
Covers common issues like operating noises and display language.
Provides instructions for regenerating used plinth filters.
Information on how to contact Miele customer service for repairs.
Details on available optional accessories for the dryer.
Identifies key components visible from the front of the appliance.
Identifies key components visible from the rear of the appliance.
Covers suitable locations and options for stacking units.
Provides guidelines for safely transporting the appliance.
Ensures proper site conditions and door clearance for installation.
Instructions for levelling the appliance using adjustable feet.
Covers ventilation requirements and external control equipment.
Details on arranging and connecting the drain hose for condensed water.
Specifies the necessary electrical connections and safety standards.
Guides on how to enter, use, and exit the supervisor level menu.
Instructions for accessing via code and changing the supervisor access code.
Covers setting display language, brightness, and clock format.
Details on adjusting finish tone, keypad tone, and welcome volume.
Configuration of fault alarms, memory function, and anti-crease.
Adjusting further cooling and cooling down temperature settings.
Configuration options for delay start and programme name display.
Covers setting drying levels for various programmes.
Settings for airway cleaning reminders and configuring programme packages.
Configuration of peak load signals and prevention functions.
Settings related to connecting and operating a payment system.
Adjusting time/impulse and setting feedback signals for payment systems.
Setting up and adjusting the payment system lock.
Configuration of clear paid signal, debounce time, and overriding time.
Adjusting programme running times for specific programmes.
Options for enabling free usage of specific programmes (FOC).
To Next Page
