Optional modules
51
You have the following options:
– Total data
Data from all programmes is collected and added together in Total
data.
– Programme data
Programme data is data which is recorded during the course of a
programme.
– Deleting data
– Module (delete total data and programme data)
– Total data (only delete total data)
– Programme data (only delete programme data)
Useful tip: The function can be deselected by pressing the
"Operating data" button again.
If the data storage capacity in the operating data module is full, a
message appears when the "START" button is pressed to inform
you that operating data will be overwritten.
Useful tip: If the "Back" button is pressed or if the "START"
button is not pressed within 30seconds, the programme will not start
and the display appears as before programme start.
To Next Page
Loading...
Need help?
General
