Models with radio frequency controls
The operating state is shown by the
Standby indicator on the vacuum.
The vacuum can be switched to a
standby mode during pauses.
^
Press the Standby button on the
handpiece.
When the button is pressed again, the
vacuum will turn on to the last selected
power level.
Every push of a button at the radio
handpiece is displayed by the indicator
light.
While vacuuming
The vacuum cleaner can also stand on
its end for vacuuming stairs, drapes
etc.
,
To prevent static electricity your
hand must touch the metal inlay on
the underside of the vacuum
handpiece. Be certain to
continuously touch this inlay when
vacuuming fine dust, flour or
sawdust as these materials are more
likely to create a static discharge. To
further prevent static discharge
while vacuuming, pull the vacuum
along by the hose with one hand
while continuing to hold the
handpiece in the other hand.
Operation
22
To Next Page
Loading...
