Need help?Do you have a question about the Miele T 277 C and is the answer not in the manual?
General| Type | Condenser dryer |
|---|---|
| Appliance placement | Freestanding |
| Drying system | Heat pump |
| Capacity | 7 kg |
| Energy Efficiency Class | A++ |
| Noise Level | 65 dB |
| Control Type | Electronic |
| Cycle time | Varies by program |
| Delay start | Yes |
| Child lock | Yes |
| Loading type | Front loading |
| Height | 850 mm |
| Width | 59.6 cm |
| Drying Programs | Wool |
| Number of programs | 10 |
Information on safe operation, usage, and maintenance for preventing accidents and damage.
Ensuring electrical safety and proper installation to prevent hazards.
Guidelines for safe operation, avoiding freezing temperatures, and handling condensed water.
Instructions for safely disposing of packing material and old appliances.
Recommendations for reducing energy consumption during drying cycles.
Detailed description of the control panel buttons, display, and indicator lamps.
Explanation of display messages, electronic lock, and programmable functions.
Guidance on interpreting fabric care symbols for tumble drying.
Specifications and notes for Cottons and Minimum Iron drying programmes.
Details on Timed Drying, Special Care, and additional programme options.
Steps for sorting, preparing, and loading laundry into the dryer.
Guidance on choosing drying programmes and additional functions.
Instructions for using Delay Start and specific drying options like Short and Low Temp.
Procedures for starting/completing cycles and understanding airway blockage indicators.
Instructions for enabling and disabling the control panel lock feature.
Steps for emptying the collected condensed water from the container.
Detailed instructions for cleaning the fluff filters after each drying cycle.
Methods for cleaning the interior drum, housing, and control panel.
Procedure for removing, checking, and cleaning the condenser unit.
Steps for correctly reinserting and securing the condenser unit after cleaning.
Initial steps to resolve common problems like the dryer not starting.
Solutions for fluff build-up and insufficient drying.
Addressing issues with long drying times, switching off, and overloading.
Diagnosing issues related to indicator lamps and programme selector.
Identification of parts and criteria for choosing a suitable installation location.
Instructions for installing under worktops and replacing the machine lid.
Ensuring the machine is level, considering room conditions, and safe moving practices.
Setting up direct drainage of condensed water to a sink or drain.
Guidelines for safe electrical connection according to UK standards and wiring.
Instructions for correctly wiring the mains lead and ensuring proper earthing.
Table showing electricity consumption and drying times for various programmes.
Key technical specifications including dimensions, weight, capacity, and ratings.
How to activate and set increased drying level and use the memory function.
To Next Page
