EasyManua.ls Logo

Miele Triflex HX2 - User Manual

Miele Triflex HX2
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1 2
1
3
2
4 5
4
7
10
5
8
11
6
9
12
31 2
Month
10 x
180°
4.1 Error code flashing LEDs – change brush
4. What to do if
3.3 Before removing the filter
3.4 Maintenance fine dust filter
3. Maintenance
Quick Start Guide
TRIFLEX HX2
These short instructions are not a substitute for the operating instructions supplied with
the machine. Please read the operating instruction manual and pay particular attention to
the Warning and Safety instructions.
M.-Nr. 11987370
20-1828_03_GB_Quick_Start_Guide_Triflex_HX2.indd 1-420-1828_03_GB_Quick_Start_Guide_Triflex_HX2.indd 1-4 09.12.21 08:2809.12.21 08:28
Question and Answer IconNeed help?

Do you have a question about the Miele Triflex HX2 and is the answer not in the manual?

Overview

The Miele Triflex HX2 is a versatile cordless stick vacuum cleaner designed for efficient cleaning and user convenience. Its modular design allows for three different configurations, adapting to various cleaning needs.

Function Description

The Triflex HX2 operates on battery power, providing cordless freedom for cleaning tasks. It features a powerful motor and an electrobrush that effectively picks up dust and debris from various surfaces. The vacuum is equipped with a multi-stage filtration system, including a fine dust filter, to capture small particles and ensure cleaner exhaust air. Power settings can be adjusted to suit the level of soiling, offering options for light, regular, and strong cleaning.

Usage Features

The Triflex HX2 boasts a highly adaptable design, allowing it to transform into three different modes:

  • Comfort Mode: In this configuration, the PowerUnit (motor, battery, and dustbin) is positioned at the bottom, close to the electrobrush. This provides a low center of gravity, making the vacuum easy to maneuver and ideal for cleaning large areas, as it feels lighter in the hand.
  • Reach Mode: By placing the PowerUnit at the top, closer to the handle, the vacuum becomes suitable for reaching under furniture or cleaning ceilings and high areas. This configuration offers extended reach without requiring the user to bend or stretch excessively.
  • Compact Mode: The PowerUnit can be detached and used independently as a handheld vacuum. This mode is perfect for quick clean-ups, vacuuming car interiors, upholstery, or tight spaces where a full-sized vacuum would be cumbersome.

The vacuum features a "Click" mechanism for easy assembly and disassembly of its components, ensuring a secure connection in all configurations. An accessory holder can be attached to the wall mount for convenient storage of additional tools.

Initial activation of the device requires charging the battery for approximately 4 hours. The battery can be charged while installed in the device, and its charge status is indicated by LEDs.

The power settings are easily adjustable:

  • Min. (Light soiling): Suitable for delicate surfaces or light dust.
  • Eco (Regular soiling): The standard setting for everyday cleaning.
  • Max. (Strong soiling): Provides maximum suction power for stubborn dirt and heavily soiled areas.

For storage, the Triflex HX2 can be mounted on a wall using the provided wall mount, which should be installed at specific heights (98 cm/38 in or 45 cm/18 in) depending on the desired configuration.

Maintenance Features

Regular maintenance is crucial for optimal performance of the Triflex HX2. The device is designed with user-friendly maintenance procedures:

Emptying the Dustbin:

  • Before emptying, the filter needs to be unlocked by rotating it 3 times (180 degrees each time) in the direction indicated by the "Unlock Filter" icon.
  • Once unlocked, the dustbin can be easily detached and emptied. The process involves a simple twist and pull motion to release the contents.

Maintaining the Fine Dust Filter:

  • The fine dust filter requires regular cleaning, ideally once a month.
  • To access the filter, the dustbin assembly needs to be opened.
  • The filter can then be removed by twisting and pulling.
  • It is recommended to tap the filter gently to dislodge accumulated dust. The filter should be rotated 10 times (180 degrees each time) to ensure thorough cleaning.

Troubleshooting Flashing LEDs (Change Brush):

  • If the LEDs on the vacuum cleaner start flashing, it indicates an issue with the brush, often signaling that it needs to be changed.
  • To address this, the electrobrush cover needs to be opened.
  • The old brush can then be removed, and a new one inserted. This process is straightforward, ensuring the vacuum can quickly return to optimal performance.

The modular design not only enhances usability but also simplifies maintenance, as individual components can be easily accessed and serviced. This ensures the longevity and consistent cleaning power of the Miele Triflex HX2.

Miele Triflex HX2 Specifications

General IconGeneral
Power sourceBattery
Charging time4 h
Battery voltage25 V
Battery capacity2.5 Ah
Maximum input power272 W
Package depth290 mm
Package width761 mm
Package height215 mm
Package weight7700 g
Color namelotus white
Product colorWhite
Dust container typeBagless
Cleaning typeDry
Power controlMechanical
Number of speeds3
Cleaning surfacesBare floor, Carpet, Hard floor, Stair steps, Upholstery
Vacuum air filteringHEPA
Dirt separating methodCyclonic
Suitable for all types of surfaceYes
Quantity per pack1 pc(s)
Vacuum brushes includedDusting brush
Weight and Dimensions IconWeight and Dimensions
Depth280 mm
Width1297 mm
Height260 mm
Weight3600 g

Related product manuals