Operating the washing machine
15
Time display
After the programme has started, the
programme duration will appear in the
display in hours and minutes.
If delay start has been selected, the
programme duration will appear at the
end of the delay start time.
Sensor controls
–
After touching the sensor, a later
start time for the programme (delay
start) can be selected. Once selec-
ted, lights up brightly.
–
The duration of the delay start period
is selected by touching the or
sensor.
The delay start time selected will ap-
pear in the time display.
After the programme has started, the
delay start time will begin to count
down.
Once the delay start time has elapsed,
the programme begins and the estim-
ated programme duration appears in
the time display.
Start/Stop sensor control
Touching the Start/Stop sensor starts
the selected programme or cancels a
programme that has already been star-
ted. The sensor flashes slowly as soon
as it is possible for a programme to be
started and then lights up constantly
after the programme has started.
To Next Page
Loading...
Need help?
General