Programme chart
33
Outerwear cold to 40°C Max. load 2.5 kg
Use for Performance outerwear (e.g. jackets and trousers) made from mem-
brane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®
etc.
Notes – Zip up or close jackets before washing.
– Do not use fabric conditioner.
– If wished, these garments can also be re-proofed using the Proof-
ing programme. Proofing should not be done every time the gar-
ment is washed.
Proofing 40°C Max. load 2.5 kg
Use for Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes – The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards either
in a tumble dryer or by ironing.
Drain / Spin –
Notes – Drain only: Select for the spin speed.
– Make sure you select the appropriate spin speed.
Separate rinse/Starch Max. load 7.0kg
Use for – Rinsing handwashed items
– Starching table cloths, serviettes and workwear
Note – Reduce the spin speed for items which crease easily.
– The laundry should be washed but not treated with fabric condi-
tioner.
– Items will be rinsed very effectively using two rinse cycles by ac-
tivating the extra Water plus option.
To Next Page
Loading...
Need help?
General