EasyManua.ls Logo

Mienta Panda - Page 4

Mienta Panda
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Instruction Manual
Assembly
until your hear a clicking sound.
on the end of the tube and pull the tube
Fitting the telescopic tube and accessories
Fitting the accessories to
the telescopic tube
Adjusting the
telescopic tube
Fitting the telescopic
tube to the handle
Instruction for use
1. Before using the appliance. Unwind the length of the power cord and insert the plug
into the power socket. Do not extend the cable beyond the RED mark. To rewind the
power cable, press the rewind button with one hand, and guide the cable with the
other hand to avoid wrapping.
2. Press the ON/OFF button to switch the appliance on. It is advisable to set the speed
control knob to MIN before switching the appliance on.
3. By moving the speed control knob, the absorption power can be adjusted.