10 11
6
7
Remote control:
Choose between internal and external adjustment.
0 = internal
1 = torch control
2 = remote control
The adjusted parameters are saved internally in the
machine when the machine is turned off.
Lock function (under secondary parameters)
Lock/unlock secondary parameters by pressing the 4-stroke
key and the V key simultaneously.
Welding voltage indicator
The welding voltage indicator is illuminated for
reasons of safety and in order to show if there is voltage
at the torch.
Temperature fault
The indicator is switched on, when the power source
is overheated.
BASIC II control panel
To Next Page
Loading...
