Migatronic PI 350 PLASMA - Technical Data and Compliance; Power Source Specifications; Current, Duty Cycle, and Cooling Data

17
Technical data
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: PI 350 PLASMA
conforms to directives: 2014/35/EU
2014/30/EU
2011/65/EU
European standards: EN/IEC60974-1
EN/IEC60974-2
EN/IEC60974-3
EN/IEC60974-10 (Class A)
Issued in Fjerritslev 17.05.2017
Niels Jørn Jakobsen
CEO
1) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
2) Equipment marked IP23 is designed for indoor and outdoor applications.
POWER SOURCE PI 350 PLASMA
Mains voltage ±15% (50Hz-60Hz), V 3x400
Minimum generator size, kVA 35
Fuse, A 32
Mains current, effective, A 26.1
Mains current, max., A 33.7
Power, (100%), kVA 18.1
Power, max, kVA 23.3
Power open circuit, W 40
Efficiency 0.91
Power factor 0.93
Current range TIG/MMA, A
Current range PLASMA, A
5-500
5-350
100% duty cycle at 20°C TIG, A
100% duty cycle at 20°C MMA, A
100% duty cycle at 20°C PLASMA, A
475
475
350
max. duty cycle at 20°C TIG, A/%
max. duty cycle at 20°C MMA, A/%
max. duty cycle at 20°C PLASMA, A/%
500/80
500/65
350/100
100% duty cycle at 40°C TIG, A/V
100% duty cycle at 40°C MMA, A/V
100% duty cycle at 40°C PLASMA, A/V
420/26.8
420/36.8
350/39.0
60% duty cycle at 40°C TIG, A/V
60% duty cycle at 40°C MMA, A/V
500/30.0
450/38.0
max. duty cycle at 40°C TIG, A/%/V
max. duty cycle at 40°C MMA, A/%/V
max. duty cycle at 40°C PLASMA, A/%/V
500/60/30.0
500/55/40.0
350/100/39
Open circuit voltage, V 95
1
Application class S/CE
2
Protection class (IEC 529) IP23
Standards EN/IEC60974-1.
EN/IEC60974-2.
EN/IEC60974-3.
EN/IEC60974-10.
Dimensions (hxwxl), mm 980x545x1090
Weight, kg 85
COOLING UNIT
Cooling efficiency, W 1200
Tank capacity, liter 3.5
Flow, bar - °C - l/min 1.2 - 60 - 1.75
Pressure max., bar 3
Standard EN/IEC60974-2
FUNCTION PROCESS VALUE RANGE
Arc-power, % Electrode 0-100
Hot-start, % Electrode 0-100
Anti-freeze TIG/Electrode always on
Start AMP, % TIG 10-200
Stop AMP, % TIG 1-90
Slope-up, sec. TIG 0-20
Slope-down, sec. TIG 0-20
Gas pre-flow, sec. TIG 0-10
Gas post-flow, sec. TIG 0-20
Spot welding time, sec. TIG 0-600
Pulse time, sec. TIG/MMA/PLASMA 0.01-10
Pause time, sec. TIG/MMA/PLASMA 0.01-10
Base AMP, % TIG/MMA/PLASMA 10-90
Second current (Bilevel), % TIG 10-200
Shield gas flow, l/min TIG 4.0-24.0
Pilot arc intensity, A PLASMA 3-20
Plasma gas flow, liter
PLASMA 0.1-9.0
Plasma gas slope-down, sec. PLASMA 0-20
Plasma gas final value, liter PLASMA 0.1-9.0
TIG-ignition TIG HF/LIFTIG
Trigger function TIG 2/4-stroke