Need help?Do you have a question about the MIHM-VOGT HTS-2/M/Zirkon-120 and is the answer not in the manual?
General| Brand | MIHM-VOGT |
|---|---|
| Model | HTS-2/M/Zirkon-120 |
| Category | Dental equipment |
| Language | English |
Details the manufacturer's limitations of liability for the product's use.
Outlines the operator's duties regarding safety and proper unit usage.
Covers manual content, structure, and safety notice symbols.
Explains the meaning of symbols and formatting used in the manual.
Provides contact information for Mihm-Vogt GmbH & Co. KG.
Specifies the qualifications and training needed for unit operators.
Critical warnings about electric shock risks during operation and maintenance.
Warnings regarding the risk of ignition from flammable materials near the oven.
Warnings about risks of burns from touching hot surfaces.
Cautions against incorrect operation, misuse, and use of non-approved parts.
Provides guidelines and warnings for safely moving the sintering oven.
Details the purpose of packaging and handling recommendations.
Provides instructions for storing the unit to prevent temperature and environmental damage.
Explains the basic operation and purpose of the sintering oven.
Describes the construction and temperature capabilities of the heating chamber.
Details the three-part ceramic door panel and its safety features.
Describes the construction of the oven's external casing.
Explains the functions and memory of the unit's program controller.
Presents the EC Declaration of Conformity and relevant standards.
Details CE, EAC, and RoHS conformity marks and their meanings.
Specifies the authorized applications and purpose of the sintering oven.
Lists actions and conditions that constitute misuse of the unit.
Recommends a suitable surface and environment for installing the oven.
Specifies requirements for the installation environment, like dryness and ventilation.
Details the required electrical circuit, breaker, and grounding for safe operation.
Explains the information presented on the unit's rating plate.
Identifies and describes the unit's control panel components and screen.
Explains the purpose and operation of various buttons and the mains switch.
Describes the information displayed when the unit is in standby mode.
Provides steps for powering on the sintering oven.
Outlines the different program slots and their assigned functions.
Provides step-by-step instructions for installing the door insulation.
Recommends using only approved sintering aids and provides application notes.
Details the procedure for feeding the sintering oven and starting a program.
Guides users through selecting and loading previously saved heating programs.
Explains how to initiate and pause a sintering program.
Provides instructions for safely removing a sintering dish after a program.
Explains how to set up temperature and time parameters for heating levels.
Details the process for saving programmed heating cycles.
Describes the automatic linear cooling process and its programming requirements.
Guides users on naming and saving heating programs for easy identification.
Explains how to modify the name of an existing heating program.
Details how to schedule a heating program to start at a specific time.
Describes the function of extra ventilation during sintering for oxidation.
Explains preliminary drying with the oven door open, using specific program slots.
Details preliminary drying that includes a sintering phase.
Covers how to access and adjust basic parameters like language and units.
Guides users on setting the current date and time on the unit.
Explains how to adjust the lift temperature parameter.
Provides instructions and warnings for safely powering down the unit.
Describes the rear interface for saving log files to a computer.
Lists necessary hardware and software for connecting to the RS-232 interface.
Details how to set up logging parameters within the uCon software.
Explains how to import data into Excel and create a chart.
Describes periodic cleaning and regeneration cycles for unit maintenance.
Highlights critical safety warnings related to electricity, hot surfaces, and repair.
Lists common faults, their possible causes, troubleshooting steps, and responsibility.
Details specific error messages displayed by the unit and their solutions.
Provides instructions for safely decommissioning and disposing of the unit and its parts.
To Next Page